Parts / Motors
Brushless outrunner 2207, 1950 KV
BLDC-2207-1950KVUse it for 5 inch props: freestyle and racing quads around 500-700 g.
Open in LessCADView it in 3D and download the STEP file ·
BrushlessMotor(stator=2207)| Size | 27.9 × 27.9 × 32 mm |
|---|---|
| Speed constant | 1950 rpm/VTypical 2207 outrunner listings |
| Thrust | up to 14 NTypical 2207 on a 5 in prop, 4S-6S |
| Current | up to 40 ATypical 2207 outrunner listings |
| Mass | 32 gTypical 2207 outrunner listings |
| Mounting holes | 4 x M3 tapped on a 16 mm square Catalog geometry |
| Shaft | Ø5 x 13 mm Catalog geometry |
Specs are typical values for this class of part, from the sources shown, not one manufacturer's datasheet. Check your chosen part's datasheet before you build.
In an assembly
On a drone arm with a propeller
The motor screwed to the end of a 4 mm carbon arm, turning a 5 inch two-blade propeller.
Open the assembly in LessCADBuilt at this size, every part editable