Parts / Motors
Brushless outrunner 2806, 1300 KV
BLDC-2806-1300KVUse it for 7 inch props: long-range quads around 800-1200 g.
Open in LessCADView it in 3D and download the STEP file ·
BrushlessMotor(stator=2806)| Size | 33.5 × 33.5 × 33 mm |
|---|---|
| Speed constant | 1300 rpm/VTypical 2806 outrunner listings |
| Thrust | up to 18 NTypical 2806 on a 7 in prop, 4S-6S |
| Current | up to 40 ATypical 2806 outrunner listings |
| Mass | 50 gTypical 2806 outrunner listings |
| Mounting holes | 4 x M3 tapped on a 19 mm square Catalog geometry |
| Shaft | Ø5 x 12 mm Catalog geometry |
Specs are typical values for this class of part, from the sources shown, not one manufacturer's datasheet. Check your chosen part's datasheet before you build.
In an assembly
On a drone arm with a propeller
The motor screwed to the end of a 4 mm carbon arm, turning a 7 inch two-blade propeller.
Open the assembly in LessCADBuilt at this size, every part editable