Parts / Fans
Condenser fan, 450 mm
CONDFAN-450Use it for a larger outdoor unit or condenser (about 2,500-3,400 CFM; a 2.5-3 ton class unit) (curve of the ebm-papst S4E450-BU03-35).
Open in LessCADView it in 3D and download the STEP file ·
CondenserFan(size=450)| Size | 522 × 522 × 172.5 mm |
|---|---|
| Free-air flow (230 V 50 Hz) | 3396 CFMEbm-papst S4E450-BU03-35 datasheet (item 12254-5-9980, approved 2018-04-26), https://digitalassets.reecegroup.com.au/m/278b6e279f6f5882/original/Specification-Sheet-EBM-AC-Axial-Fan-with-Grille.pdf; "Measured values" table at 230 V 50 Hz (ISO 5801 installation category A), free air to the maximum back pressure |
| Max. back pressure (230 V 50 Hz) | 120 PaEbm-papst S4E450-BU03-35 datasheet (item 12254-5-9980, approved 2018-04-26), https://digitalassets.reecegroup.com.au/m/278b6e279f6f5882/original/Specification-Sheet-EBM-AC-Axial-Fan-with-Grille.pdf; "Measured values" table at 230 V 50 Hz (ISO 5801 installation category A), free air to the maximum back pressure |
| Rated speed | 1300-1380 rpmEbm-papst S4E450-BU03-35 datasheet (item 12254-5-9980, approved 2018-04-26), https://digitalassets.reecegroup.com.au/m/278b6e279f6f5882/original/Specification-Sheet-EBM-AC-Axial-Fan-with-Grille.pdf; 50 Hz, free air to maximum back pressure; 5 blades, counter-clockwise viewed toward the rotor |
| Power | 272-350 WEbm-papst S4E450-BU03-35 datasheet (item 12254-5-9980, approved 2018-04-26), https://digitalassets.reecegroup.com.au/m/278b6e279f6f5882/original/Specification-Sheet-EBM-AC-Axial-Fan-with-Grille.pdf; power input at 50 Hz |
| Mass | 6.3 kgEbm-papst S4E450-BU03-35 datasheet (item 12254-5-9980, approved 2018-04-26), https://digitalassets.reecegroup.com.au/m/278b6e279f6f5882/original/Specification-Sheet-EBM-AC-Axial-Fan-with-Grille.pdf; weight |
| Mounting ring | 522 mmMounting ring outside diameter: estimated from RS Components listing 064-6766 for the S4D450-AU01-01 (same size and full-nozzle grille): 522 x 172.5 mm |
| Hub diameter | 135 mmRotor (hub) diameter estimated from the motor frame size; the datasheet drawing dimensions it, its text does not |
| Opening | Ø460 mm Catalog geometry |
Specs are typical values for this class of part, from the sources shown, not one manufacturer's datasheet. Check your chosen part's datasheet before you build.
In an assembly
Behind an outdoor-unit panel
The fan bolted behind a 602 mm sheet-steel panel with its opening cut, blowing out through it, the way an outdoor unit discharges its hot air.
Open the assembly in LessCADBuilt at this size, every part editable