Parts / Fans
Condenser fan, 500 mm
CONDFAN-500Use it for a large outdoor unit or condenser (about 3,000-5,200 CFM; a 4-5 ton class unit or a small commercial condenser) (curve of the ebm-papst S4E500-AM03-01).
Open in LessCADView it in 3D and download the STEP file ·
CondenserFan(size=500)| Size | 585 × 585 × 200 mm |
|---|---|
| Free-air flow (230 V 50 Hz) | 5241 CFMEbm-papst S4E500-AM03-01 datasheet (item 10081-5-9980, revision KM71440), https://www.fansco.com/datasheets/ebmpapst/S4E500-AM03-01.pdf; "Measured values" table at 230 V 50 Hz (ISO 5801 installation category A), free air to the maximum back pressure |
| Max. back pressure (230 V 50 Hz) | 150 PaEbm-papst S4E500-AM03-01 datasheet (item 10081-5-9980, revision KM71440), https://www.fansco.com/datasheets/ebmpapst/S4E500-AM03-01.pdf; "Measured values" table at 230 V 50 Hz (ISO 5801 installation category A), free air to the maximum back pressure |
| Free-air flow (230 V 60 Hz) | 5797 CFMEbm-papst S4E500-AM03-01 datasheet (item 10081-5-9980, revision KM71440), https://www.fansco.com/datasheets/ebmpapst/S4E500-AM03-01.pdf; "Measured values" table at 230 V 60 Hz |
| Max. back pressure (230 V 60 Hz) | 100 PaEbm-papst S4E500-AM03-01 datasheet (item 10081-5-9980, revision KM71440), https://www.fansco.com/datasheets/ebmpapst/S4E500-AM03-01.pdf; "Measured values" table at 230 V 60 Hz |
| Rated speed | 1300-1380 rpmEbm-papst S4E500-AM03-01 datasheet (item 10081-5-9980, revision KM71440), https://www.fansco.com/datasheets/ebmpapst/S4E500-AM03-01.pdf; 50 Hz, free air to maximum back pressure; 5 blades, counter-clockwise viewed toward the rotor |
| Power | 513-680 WEbm-papst S4E500-AM03-01 datasheet (item 10081-5-9980, revision KM71440), https://www.fansco.com/datasheets/ebmpapst/S4E500-AM03-01.pdf; power input at 50 Hz |
| Mounting ring | 585 mmMounting ring outside diameter: estimated: ring scaled from the 350 and 400 mm sizes (about 1.17 x the blade diameter), depth from the 450 mm S4D450-GB12-09 (193.5 mm) |
| Hub diameter | 150 mmRotor (hub) diameter estimated from the motor frame size; the datasheet drawing dimensions it, its text does not |
| Opening | Ø510 mm Catalog geometry |
Specs are typical values for this class of part, from the sources shown, not one manufacturer's datasheet. Check your chosen part's datasheet before you build.
In an assembly
Behind an outdoor-unit panel
The fan bolted behind a 665 mm sheet-steel panel with its opening cut, blowing out through it, the way an outdoor unit discharges its hot air.
Open the assembly in LessCADBuilt at this size, every part editable