Parts / Fans
Axial fan, 25 x 10 mm
FAN-25x10Use it for spot-cooling a single chip or a tiny board (under about 40 mm).
Open in LessCADView it in 3D and download the STEP file ·
AxialFan(size=25, thickness=10)| Size | 25 × 25 × 10 mm |
|---|---|
| Free-air flow | 3 CFMTypical 25 mm 12 V axial fan: 3 CFM free air, 17 Pa shutoff |
| Shutoff pressure | 17 PaTypical 25 mm 12 V axial fan: 3 CFM free air, 17 Pa shutoff |
| Power | 0.3-0.6 WTypical 25 mm 12 V fan datasheets |
| Mass | 5 gTypical 25 mm fan datasheets |
| Opening | Ø24 mm Catalog geometry |
| Mounting holes | 4 x Ø2.4 mm on a 20 mm square Catalog geometry |
Specs are typical values for this class of part, from the sources shown, not one manufacturer's datasheet. Check your chosen part's datasheet before you build.
In an assembly
On a finned heat sink
The fan blowing down into an aluminium heat sink with 10 fins, the usual way a fan cools a chip or a power stage.
Open the assembly in LessCADBuilt at this size, every part editable