Parts / Fans
Axial fan, 30 x 10 mm
FAN-30x10Use it for spot-cooling a small board or module (about 30-50 mm).
Open in LessCADView it in 3D and download the STEP file ·
AxialFan(size=30, thickness=10)| Size | 30 × 30 × 10 mm |
|---|---|
| Free-air flow | 4 CFMTypical 30 mm 12 V axial fan: 4 CFM free air, 20 Pa shutoff |
| Shutoff pressure | 20 PaTypical 30 mm 12 V axial fan: 4 CFM free air, 20 Pa shutoff |
| Power | 0.4-0.8 WTypical 30 mm 12 V fan datasheets |
| Mass | 8 gTypical 30 mm fan datasheets |
| Opening | Ø29 mm Catalog geometry |
| Mounting holes | 4 x Ø3.2 mm on a 24 mm square Catalog geometry |
Specs are typical values for this class of part, from the sources shown, not one manufacturer's datasheet. Check your chosen part's datasheet before you build.
In an assembly
On a finned heat sink
The fan blowing down into an aluminium heat sink with 12 fins, the usual way a fan cools a chip or a power stage.
Open the assembly in LessCADBuilt at this size, every part editable