Parts / Fans
Axial fan, 40 x 10 mm
FAN-40x10Use it for cooling a small PCB, single-board computer or 3D-printer hotend (boards up to about 100 mm).
Open in LessCADView it in 3D and download the STEP file ·
AxialFan(size=40, thickness=10)| Size | 40 × 40 × 10 mm |
|---|---|
| Free-air flow | 7 CFMTypical 40 mm 12 V axial fan: 7 CFM free air, 20 Pa shutoff |
| Shutoff pressure | 20 PaTypical 40 mm 12 V axial fan: 7 CFM free air, 20 Pa shutoff |
| Power | 0.5-1 WTypical 40 mm 12 V fan datasheets |
| Mass | 12 gTypical 40 mm fan datasheets |
| Opening | Ø38 mm Catalog geometry |
| Mounting holes | 4 x Ø3.4 mm on a 32 mm square Catalog geometry |
Specs are typical values for this class of part, from the sources shown, not one manufacturer's datasheet. Check your chosen part's datasheet before you build.
In an assembly
On a finned heat sink
The fan blowing down into an aluminium heat sink with 14 fins, the usual way a fan cools a chip or a power stage.
Open the assembly in LessCADBuilt at this size, every part editable