Parts / Fans
Axial fan, 60 x 25 mm
FAN-60x25Use it for cooling a small enclosure or heat sink (about 60-90 mm), or a few watts to about 20 W.
Open in LessCADView it in 3D and download the STEP file ·
AxialFan(size=60, thickness=25)| Size | 60 × 60 × 25 mm |
|---|---|
| Free-air flow | 20 CFMTypical 60 mm 12 V axial fan: 20 CFM free air, 30 Pa shutoff |
| Shutoff pressure | 30 PaTypical 60 mm 12 V axial fan: 20 CFM free air, 30 Pa shutoff |
| Power | 0.8-1.5 WTypical 60 mm 12 V fan datasheets |
| Mass | 50 gTypical 60 mm fan datasheets |
| Opening | Ø57 mm Catalog geometry |
| Mounting holes | 4 x Ø4.3 mm on a 50 mm square Catalog geometry |
Specs are typical values for this class of part, from the sources shown, not one manufacturer's datasheet. Check your chosen part's datasheet before you build.
In an assembly
On a finned heat sink
The fan blowing down into an aluminium heat sink with 14 fins, the usual way a fan cools a chip or a power stage.
Open the assembly in LessCADBuilt at this size, every part editable