Parts / Motors
IEC 63 induction motor, 0.18 kW 4-pole
IEC63-B3-0.18kWUse it for about 0.2 kW: small pumps, fans and conveyors, bench machines.
Open in LessCADView it in 3D and download the STEP file ·
InductionMotor(frame=63)| Size | 233 × 124 × 159.5 mm |
|---|---|
| Power | 0.18 kWIEC 63 4-pole catalogue ratings |
| Rated speed | 1370 rpm4-pole at 50 Hz |
| Heat given off | 70 WLosses at rated load, IE2-class efficiency, IEC 63 |
| Mass | 4.5 kgIEC 63 catalogue weights |
| Mounting holes | 4 x Ø7 mm for M6 on 80 x 100 mm Catalog geometry |
| Shaft | Ø11 x 23 mm, keyed Catalog geometry |
Specs are typical values for this class of part, from the sources shown, not one manufacturer's datasheet. Check your chosen part's datasheet before you build.
In an assembly
On a base plate driving a shaft
The motor bolted to a 12 mm steel base plate, with a jaw coupling on its shaft and the driven shaft in a pillow-block bearing.
Open the assembly in LessCADBuilt at this size, every part editable