Parts / Motors
IEC 71 induction motor, 0.37 kW 4-pole
IEC71-B3-0.37kWUse it for about 0.4 kW: small compressors, mixers, lathes and drill presses.
Open in LessCADView it in 3D and download the STEP file ·
InductionMotor(frame=71)| Size | 270 × 140 × 175.5 mm |
|---|---|
| Power | 0.37 kWIEC 71 4-pole catalogue ratings |
| Rated speed | 1390 rpm4-pole at 50 Hz |
| Heat given off | 120 WLosses at rated load, IE2-class efficiency, IEC 71 |
| Mass | 6.5 kgIEC 71 catalogue weights |
| Mounting holes | 4 x Ø7 mm for M6 on 90 x 112 mm Catalog geometry |
| Shaft | Ø14 x 30 mm, keyed Catalog geometry |
Specs are typical values for this class of part, from the sources shown, not one manufacturer's datasheet. Check your chosen part's datasheet before you build.
In an assembly
On a base plate driving a shaft
The motor bolted to a 12 mm steel base plate, with a jaw coupling on its shaft and the driven shaft in a pillow-block bearing.
Open the assembly in LessCADBuilt at this size, every part editable