Parts / Motors
IEC 80 induction motor, 0.75 kW 4-pole
IEC80-B3-0.75kWUse it for about 0.75 kW: workshop machines, larger pumps and fans, gearbox drives.
Open in LessCADView it in 3D and download the STEP file ·
InductionMotor(frame=80)| Size | 315 × 158 × 193.5 mm |
|---|---|
| Power | 0.75 kWIEC 80 4-pole catalogue ratings |
| Rated speed | 1400 rpm4-pole at 50 Hz |
| Heat given off | 200 WLosses at rated load, IE2-class efficiency, IEC 80 |
| Mass | 10 kgIEC 80 catalogue weights |
| Mounting holes | 4 x Ø10 mm for M8 on 100 x 125 mm Catalog geometry |
| Shaft | Ø19 x 40 mm, keyed Catalog geometry |
Specs are typical values for this class of part, from the sources shown, not one manufacturer's datasheet. Check your chosen part's datasheet before you build.
In an assembly
On a base plate driving a shaft
The motor bolted to a 15 mm steel base plate, with a jaw coupling on its shaft and the driven shaft in a pillow-block bearing.
Open the assembly in LessCADBuilt at this size, every part editable