Parts / Motors
NEMA 17 stepper, 48 mm
NEMA17-48Use it for moderate loads: printer X/Y axes with belts, lead-screw Z axes, small arm joints.
Open in LessCADView it in 3D and download the STEP file ·
Stepper(frame=17, length=48)| Size | 42.3 × 47.2 × 74 mm |
|---|---|
| Holding torque | 0.55 N·mTypical 48 mm NEMA17 datasheets |
| Rated current | 1.5-2 ATypical NEMA17 datasheets |
| Heat given off | 6 WI^2 R, both phases, at rated current |
| Mass | 350 gTypical 48 mm NEMA17 datasheets |
| Mounting holes | 4 x M3 tapped on a 31 mm square Catalog geometry |
| Pilot | Ø22 x 2 mm Catalog geometry |
| Shaft | Ø5 x 24 mm, D-flat Catalog geometry |
Specs are typical values for this class of part, from the sources shown, not one manufacturer's datasheet. Check your chosen part's datasheet before you build.
In an assembly
On an L-bracket driving a lead screw
The motor bolted to a 3 mm aluminium L-bracket through its pilot and four screw holes, with a 20 mm shaft coupler and a 8 mm lead screw.
Open the assembly in LessCADBuilt at this size, every part editable