Parts / Motors
NEMA 23 stepper, 56 mm
NEMA23-56Use it for heavy loads: CNC router axes, robot arm shoulders, conveyors.
Open in LessCADView it in 3D and download the STEP file ·
Stepper(frame=23, length=56)| Size | 56.4 × 61.3 × 78.6 mm |
|---|---|
| Holding torque | 1.26 N·mTypical 56 mm NEMA23 datasheets |
| Rated current | 2.8-3 ATypical NEMA23 datasheets |
| Heat given off | 10 WI^2 R, both phases, at rated current |
| Mass | 700 gTypical 56 mm NEMA23 datasheets |
| Mounting holes | 4 x Ø5.1 mm for M5 on a 47.14 mm square Catalog geometry |
| Pilot | Ø38.1 x 1.6 mm Catalog geometry |
| Shaft | Ø6.35 x 21 mm, D-flat Catalog geometry |
Specs are typical values for this class of part, from the sources shown, not one manufacturer's datasheet. Check your chosen part's datasheet before you build.
In an assembly
On an L-bracket driving a lead screw
The motor bolted to a 4 mm aluminium L-bracket through its pilot and four screw holes, with a 25 mm shaft coupler and a 10 mm lead screw.
Open the assembly in LessCADBuilt at this size, every part editable