Thermal conductivity against densityHigher and further left: spreads more heat for its weightThermal expansion against thermal conductivityLower and further right: warps less when heated
Try it on a partA bracket to run stress or thermal on, free in your browser
Moplen HP501H Product DataLyondellBasellPlastic Polypropylene · Yield strength: typical, tensile stress at yield ISO 527Plastic Polypropylene · Young's modulus (stiffness): typical, tensile modulus ISO 527Plastic Polypropylene · Density: typical, 23 °C ISO 1183-1Plastic Polypropylene · Max service temperature: HDT 0.45 MPa (ISO 75B), unannealed
3
Wieland-K32 (Cu-ETP, C11000) Data SheetWielandarchived copyCopper C110 · Poisson's ratio: reference value at room temperature (Wieland-K32 = Cu-ETP = C11000, rolled products)
4
Typical Engineering Properties of PolypropyleneINEOS Olefins & Polymers USAarchived copyPlastic Polypropylene · Poisson's ratio: base material: polypropylene homopolymer family (INEOS Olefins & Polymers USA, Typical Engineering Properties of Polypropylene)Plastic Polypropylene · Thermal conductivity: base material: polypropylene homopolymer family (INEOS Olefins & Polymers USA, Typical Engineering Properties of Polypropylene)Plastic Polypropylene · Thermal expansion: base material: polypropylene homopolymer family (INEOS Olefins & Polymers USA, Typical Engineering Properties of Polypropylene)
Each number points to the document that states it, with the exact basis. Values without a number are computed from the sourced ones. "Not sourced" means no citable source states it (or only a specification minimum); figures computed from it are left out too.
Questions
Mechanical
Is Copper C110 stronger than Plastic Polypropylene?
Copper C110 is stronger: its yield strength is 69 MPa against 33 MPa for Plastic Polypropylene (2.09x).
Which is lighter, Copper C110 or Plastic Polypropylene?
Plastic Polypropylene is lighter: 900 kg/m³ against 8,913 kg/m³ for Copper C110.
Which is stiffer, Copper C110 or Plastic Polypropylene?
Copper C110 is stiffer: Young's modulus 117 GPa against 1.45 GPa for Plastic Polypropylene, so the same part in Copper C110 deflects less under the same load.
Which is lighter for the same job, Copper C110 or Plastic Polypropylene?
For the same stiffness or strength: Copper C110 is lighter for a stiff rod or tie (tension); Plastic Polypropylene is lighter for a stiff beam (bending), stiff panel or plate, strong rod or tie, strong beam, strong panel or plate.
Part that must be
Copper C110
Plastic Polypropylene
Stiff rod or tie (tension)
lighter
8.16x heavier
Stiff beam (bending)
10% heavier
lighter
Stiff panel or plate
2.29x heavier
lighter
Strong rod or tie
4.74x heavier
lighter
Strong beam
6.06x heavier
lighter
Strong panel or plate
6.85x heavier
lighter
For the same stiffness or strength, mass scales with density over stiffness (or strength) raised to a power set by how the part is loaded: 1 for a rod in tension, 1/2 for a beam in bending, 1/3 for a panel (the standard material-selection indices).
Thermal
Which conducts heat better, Copper C110 or Plastic Polypropylene?
Copper C110 conducts heat better: 391 W/m·K against 0.195 W/m·K for Plastic Polypropylene.
Which expands less with temperature?
Copper C110 expands less: 16.9 µm/m·K against 90 µm/m·K for Plastic Polypropylene.