Materials / Compare
Plastic Polycarbonate vs. Steel AISI 1018
Compare Plastic Polycarbonate vs. Steel AISI 1018 strength, stiffness, weight and thermal properties.
| Mechanical | Plastic Polycarbonate | Steel AISI 1018 |
|---|---|---|
| Yield strength | 65MPa1 | producer-stated372MPa25.72x stronger |
| Ultimate tensile strength | 65MPa1 | producer-stated441MPa2 |
| Flexural strength | 97MPa1 | not sourced |
| Elongation at break | 125%18.33x more ductile | in 2 in15%2 |
| Young's modulus (stiffness) | 2.4GPa1 | base material200GPa3 |
| Density | 1,200kg/m³1 | base material7,861kg/m³3 |
| Strength to weight | 54.2kN·m/kg14% higher | 47.3kN·m/kg |
| Stiffness to weight | 2MN·m/kg | 25.4MN·m/kg12.7x higher |
| Poisson's ratio | 0.384 | base material0.323 |
| Shear modulus | 0.87GPa | 75.7GPa87.1x stiffer in shear |
| Bulk modulus | 3.33GPa | 185GPa55.5x higher |
| Speed of sound | 1,414m/s | 5,043m/s3.57x faster |
| Thermal | Plastic Polycarbonate | Steel AISI 1018 |
|---|---|---|
| Thermal conductivity | 0.2W/m·K1 | base material51.9W/m·K3 |
| Thermal expansion | 65µm/m·K1 | base material12µm/m·K55.42x less |
| 100 mm part over a 50 °C swing | 325µm growth | 60µm growth5.42x less |
| Specific heat | 1,172J/kg·K6 | base material486J/kg·K3 |
| Heats up and cools (diffusivity) | 0.142mm²/s | 13.6mm²/s95.5x faster |
| Thermal shock resistance | 51.7W/m | 5,473W/m106x more resistant |
| Glass transition | 144°C1 | not sourced |
| Max service temperature | UL 746B RTI125°C1 | not sourced |
| Try it on a partA bracket to run stress or thermal on, free in your browser | Open in LessCAD | Open in LessCAD |
|---|
Sources6 documents: Covestro, Niagara LaSalle, U.S. Department of Defense, Ovako, Bayer MaterialScience
- Plastic Polycarbonate
- Covestro Makrolon 2405 general-purpose PC (MVR 19), Covestro technical datasheet version 2026-09-28, typical values
- Steel AISI 1018
- AISI 1018 cold drawn bar (Niagara LaSalle, cold-finished bar producer)
- 1Makrolon 2405 Technical Data SheetCovestroPlastic Polycarbonate · Yield strength: typical, tensile yieldPlastic Polycarbonate · Ultimate tensile strength: typical, stress at breakPlastic Polycarbonate · Flexural strength: typical, flexural strengthPlastic Polycarbonate · Elongation at break: typical, strain at breakPlastic Polycarbonate · Young's modulus (stiffness): typicalPlastic Polycarbonate · Density: typicalPlastic Polycarbonate · Thermal conductivity: typical, through-plane, 23 CPlastic Polycarbonate · Thermal expansion: typical, 23-55 C, parallel and normalPlastic Polycarbonate · Glass transition: typical, DSC 10 C/minPlastic Polycarbonate · Max service temperature: UL 746B RTI, tensile strength, 1.5 mm
- 21018 PropertiesNiagara LaSallearchived copySteel AISI 1018 · Yield strength: producer-stated, cold drawnSteel AISI 1018 · Ultimate tensile strength: producer-stated, cold drawnSteel AISI 1018 · Elongation at break: in 2 in (50.8 mm)
- 3MIL-HDBK-5J, Metallic Materials and Elements for Aerospace Vehicle Structures (2003)U.S. Department of DefenseSteel AISI 1018 · Young's modulus (stiffness): base material: AISI 1025 plain carbon steel (MIL-HDBK-5J design value; ASTM A108 bar is the cold-finished carbon-steel bar spec that also covers 1018)Steel AISI 1018 · Density: base material: AISI 1025 plain carbon steel (MIL-HDBK-5J design value; ASTM A108 bar is the cold-finished carbon-steel bar spec that also covers 1018)Steel AISI 1018 · Poisson's ratio: base material: AISI 1025 plain carbon steel (MIL-HDBK-5J design value; ASTM A108 bar is the cold-finished carbon-steel bar spec that also covers 1018)Steel AISI 1018 · Thermal conductivity: base material: AISI 1025 plain carbon steel (MIL-HDBK-5J design value; ASTM A108 bar is the cold-finished carbon-steel bar spec that also covers 1018)Steel AISI 1018 · Specific heat: base material: AISI 1025 plain carbon steel (MIL-HDBK-5J design value; ASTM A108 bar is the cold-finished carbon-steel bar spec that also covers 1018)
- 4Engineering Polymers Part and Mold Design: Thermoplastics, A Design GuideCovestroarchived copyPlastic Polycarbonate · Poisson's ratio: typical, polycarbonate family (Covestro Part and Mold Design guide, Table 3-1)
- 5S275JR Steel GradeOvakoSteel AISI 1018 · Thermal expansion: base material: unalloyed carbon steel, Ovako family table (S275JR, 'none alloyed structural steels', C <= 0.21%); mean 20-300 °C
- 6Makrolon 2405 Data Sheet, ASTM valuesBayer MaterialSciencearchived copyPlastic Polycarbonate · Specific heat: typical (guide value), Bayer ASTM datasheet for Makrolon 2405, ASTM D 2766
Each number points to the document that states it, with the exact basis. Values without a number are computed from the sourced ones. "Not sourced" means no citable source states it (or only a specification minimum); figures computed from it are left out too.
Questions
Mechanical
Is Plastic Polycarbonate stronger than Steel AISI 1018?
Steel AISI 1018 is stronger: its yield strength is 372 MPa against 65 MPa for Plastic Polycarbonate (5.72x).
Which is lighter, Plastic Polycarbonate or Steel AISI 1018?
Plastic Polycarbonate is lighter: 1,200 kg/m³ against 7,861 kg/m³ for Steel AISI 1018.
Which is stiffer, Plastic Polycarbonate or Steel AISI 1018?
Steel AISI 1018 is stiffer: Young's modulus 200 GPa against 2.4 GPa for Plastic Polycarbonate, so the same part in Steel AISI 1018 deflects less under the same load.
Which is lighter for the same job, Plastic Polycarbonate or Steel AISI 1018?
For the same stiffness or strength: Plastic Polycarbonate is lighter for a stiff panel or plate, strong rod or tie, strong beam, strong panel or plate; Steel AISI 1018 is lighter for a stiff rod or tie (tension), stiff beam (bending).
| Part that must be | Plastic Polycarbonate | Steel AISI 1018 |
|---|---|---|
| Stiff rod or tie (tension) | 12.7x heavier | lighter |
| Stiff beam (bending) | 39% heavier | lighter |
| Stiff panel or plate | lighter | 1.5x heavier |
| Strong rod or tie | lighter | 14% heavier |
| Strong beam | lighter | 2.05x heavier |
| Strong panel or plate | lighter | 2.74x heavier |
For the same stiffness or strength, mass scales with density over stiffness (or strength) raised to a power set by how the part is loaded: 1 for a rod in tension, 1/2 for a beam in bending, 1/3 for a panel (the standard material-selection indices).
Which is more ductile, Plastic Polycarbonate or Steel AISI 1018?
Plastic Polycarbonate stretches further before it breaks: 125% elongation at break against 15% for Steel AISI 1018.
Thermal
Which conducts heat better, Plastic Polycarbonate or Steel AISI 1018?
Steel AISI 1018 conducts heat better: 51.9 W/m·K against 0.2 W/m·K for Plastic Polycarbonate.
Which expands less with temperature?
Steel AISI 1018 expands less: 12 µm/m·K against 65 µm/m·K for Plastic Polycarbonate.
Related comparisons
- Plastic Polycarbonate vs. Plastic Nylon
- Plastic Polycarbonate vs. SLA Resin Standard
- Plastic Polycarbonate vs. FDM Polycarbonate
- Plastic Polycarbonate vs. Plastic POM/Acetal
- Steel AISI 1018 vs. Steel
- Steel AISI 1018 vs. Steel A992
- Steel AISI 1018 vs. Stainless Steel 303
- Steel AISI 1018 vs. Stainless Steel 316