Materials / Compare
Concrete vs. DMLS 17-4PH Stainless Steel
Compare Concrete vs. DMLS 17-4PH Stainless Steel strength, stiffness, weight and thermal properties.
| Mechanical | Concrete | DMLS 17-4PH Stainless Steel |
|---|---|---|
| Yield strength | none (brittle) | mean861MPa1 |
| Ultimate tensile strength | not sourced | mean886MPa1 |
| Compressive strength | 27.6MPa2 | not sourced |
| Elongation at break | none (brittle) | mean at break19.9%1 |
| Young's modulus (stiffness) | design value25.1GPa3 | base material197GPa4 |
| Density | 2,240–2,400kg/m³5 | mean part density7,790kg/m³1 |
| Strength to weight | not sourced | 110kN·m/kg |
| Stiffness to weight | 10.8MN·m/kg | 25.3MN·m/kg2.34x higher |
| Poisson's ratio | 0.15–0.26 | base material0.2724 |
| Shear modulus | 10.7GPa | 77.4GPa7.25x stiffer in shear |
| Bulk modulus | 12.9GPa | 144GPa11.2x higher |
| Speed of sound | 3,289m/s | 5,029m/s1.53x faster |
| Thermal | Concrete | DMLS 17-4PH Stainless Steel |
|---|---|---|
| Thermal conductivity | 0.9W/m·K7 | base material17.9W/m·K419.9x more heat through a fin |
| Thermal expansion | 8–12µm/m·K8 | mean 25-100 °C10.4µm/m·K1 |
| 100 mm part over a 50 °C swing | 50µm growth4% less | 52µm growth |
| Specific heat | 900J/kg·K91.96x higher | base material460J/kg·K4 |
| Heats up and cools (diffusivity) | 0.431mm²/s | 5mm²/s11.6x faster |
| Thermal shock resistance | not sourced | 5,474W/m |
| Max service temperature | 65°C6 | not sourced |
| Try it on a partA sample part to run stress or thermal on, free in your browser | Open in LessCAD | Open in LessCAD |
|---|
Sources9 documents: EOS GmbH, National Ready Mixed Concrete Association, Federal Highway Administration, Cleveland-Cliffs, Oak Ridge National Laboratory, USDA Forest Products Laboratory, National Institute of Standards and Technology
- Concrete
- Normal-weight portland cement concrete, strength class f'c = 4000 psi (28 MPa) per NRMCA CIP 35; density NRMCA CIP 36; thermal conductivity USDA FPL Wood Handbook; service temperature ORNL/NRC review
- DMLS 17-4PH Stainless Steel
- EOS StainlessSteel 17-4PH IndustryLine (powder 9011-0041), EOS M 290, 40 µm, default job 17-4PH_040_StainlessM291_100, as built, horizontal; ISO 6892 & ASTM E8M
- 1EOS StainlessSteel 17-4PH IndustryLine Material Data Sheet, M 290EOS GmbHarchived copyDMLS 17-4PH Stainless Steel · Yield strength: mean, as built, horizontal (N=72)DMLS 17-4PH Stainless Steel · Ultimate tensile strength: mean, as built, horizontal (N=72)DMLS 17-4PH Stainless Steel · Elongation at break: mean at break, as built, horizontalDMLS 17-4PH Stainless Steel · Density: mean part density (ISO 3369)DMLS 17-4PH Stainless Steel · Thermal expansion: mean 25-100 °C, ASTM E228, AFTER atmospheric heat treatment (as-built value not published)
- 2CIP 35: Testing Compressive Strength of ConcreteNational Ready Mixed Concrete Associationarchived copyConcrete · Compressive strength: specified compressive strength class (f'c), not a measured typical
- 3LRFD Steel Girder Superstructure Bridge Design Example, Design Step 2: Concrete Deck DesignFederal Highway AdministrationConcrete · Young's modulus (stiffness): design value: AASHTO LRFD 5.4.2.4 applied by FHWA to f'c = 4.0 ksi normal-weight concrete
- 417-4 PH Stainless Steel Product Data Bulletin (2021)Cleveland-CliffsDMLS 17-4PH Stainless Steel · Young's modulus (stiffness): base material: wrought 17-4 PH, Condition H 900 (Cleveland-Cliffs)DMLS 17-4PH Stainless Steel · Poisson's ratio: base material: wrought 17-4 PH, all conditions (Cleveland-Cliffs)DMLS 17-4PH Stainless Steel · Thermal conductivity: base material: wrought 17-4 PH, Condition H 900, at 149 °C (Cleveland-Cliffs)DMLS 17-4PH Stainless Steel · Specific heat: base material: wrought 17-4 PH, Condition A, 0-100 °C (Cleveland-Cliffs)
- 5CIP 36: Structural Lightweight ConcreteNational Ready Mixed Concrete Associationarchived copyConcrete · Density: range for normalweight concrete
- 6The Effect of Elevated Temperature on Concrete Materials and Structures: A Literature Review (ORNL/TM-2005/553)Oak Ridge National Laboratoryarchived copyConcrete · Poisson's ratio: general range at normal ambient conditions (overall 0.11-0.32)Concrete · Max service temperature: code long-term temperature limit (ASME Code, concrete containments)
- 7Wood Handbook (FPL-GTR-282), Chapter 4: Moisture Relations and Physical Properties of WoodUSDA Forest Products LaboratoryConcrete · Thermal conductivity: typical (comparative value)
- 8Thermal Coefficient of Portland Cement ConcreteFederal Highway AdministrationConcrete · Thermal expansion: typical range for portland cement concrete (aggregate dependent)
- 9Best Practice Guidelines for Structural Fire Resistance Design of Concrete and Steel Buildings (TN 1681)National Institute of Standards and Technologyarchived copyConcrete · Specific heat: typical (NIST guidance for thermal analysis)
Each number points to the document that states it, with the exact basis. Values without a number are computed from the sourced ones. "Not sourced" means no citable source states it (or only a specification minimum); figures computed from it are left out too.
DMLS 17-4PH Stainless Steel is 3D printed: its properties depend on build direction and print settings; these are typical values.
Questions
Mechanical
Which is lighter, Concrete or DMLS 17-4PH Stainless Steel?
Concrete is lighter: 2,320 kg/m³ against 7,790 kg/m³ for DMLS 17-4PH Stainless Steel.
Which is stiffer, Concrete or DMLS 17-4PH Stainless Steel?
DMLS 17-4PH Stainless Steel is stiffer: Young's modulus 197 GPa against 25.1 GPa for Concrete, so the same part in DMLS 17-4PH Stainless Steel deflects less under the same load.
Which is lighter for the same job, Concrete or DMLS 17-4PH Stainless Steel?
For the same stiffness or strength: Concrete is lighter for a stiff beam (bending), stiff panel or plate; DMLS 17-4PH Stainless Steel is lighter for a stiff rod or tie (tension).
| Part that must be | Concrete | DMLS 17-4PH Stainless Steel |
|---|---|---|
| Stiff rod or tie (tension) | 2.34x heavier | lighter |
| Stiff beam (bending) | lighter | 20% heavier |
| Stiff panel or plate | lighter | 1.69x heavier |
For the same stiffness or strength, mass scales with density over stiffness (or strength) raised to a power set by how the part is loaded: 1 for a rod in tension, 1/2 for a beam in bending, 1/3 for a panel (the standard material-selection indices).
Thermal
Which conducts heat better, Concrete or DMLS 17-4PH Stainless Steel?
DMLS 17-4PH Stainless Steel conducts heat better: 17.9 W/m·K against 0.9 W/m·K for Concrete.
Which expands less with temperature?
Concrete expands less: 10 µm/m·K against 10.4 µm/m·K for DMLS 17-4PH Stainless Steel.
Related comparisons
- Concrete vs. PCB Board FR-4, 2 copper planes
- Concrete vs. Plastic PTFE
- Concrete vs. Brick
- Concrete vs. PCB Laminate FR-4
- DMLS 17-4PH Stainless Steel vs. Steel AISI 4340
- DMLS 17-4PH Stainless Steel vs. Nickel Inconel 718
- DMLS 17-4PH Stainless Steel vs. Stainless Steel 17-4PH
- DMLS 17-4PH Stainless Steel vs. Steel AISI 1045