Materials / Compare
DMLS AlSi10Mg Aluminum vs. Plastic Polypropylene
Compare DMLS AlSi10Mg Aluminum vs. Plastic Polypropylene strength, stiffness, weight and thermal properties.
| Mechanical | DMLS AlSi10Mg Aluminum | Plastic Polypropylene |
|---|---|---|
| Yield strength | 270MPa18.18x stronger | 33MPa2 |
| Ultimate tensile strength | 450MPa1 | not stated (yield given) |
| Elongation at break | 10.2%1 | not sourced |
| Young's modulus (stiffness) | 72GPa349.7x stiffer | 1.45GPa2 |
| Density | 2,670kg/m³4 | 900kg/m³22.97x lighter |
| Strength to weight | 101kN·m/kg2.76x higher | 36.7kN·m/kg |
| Stiffness to weight | 27MN·m/kg16.7x higher | 1.61MN·m/kg |
| Poisson's ratio | base material0.335 | base material0.426 |
| Shear modulus | 27.1GPa53x stiffer in shear | 0.511GPa |
| Bulk modulus | 70.6GPa23.4x higher | 3.02GPa |
| Speed of sound | 5,193m/s4.09x faster | 1,269m/s |
| Thermal | DMLS AlSi10Mg Aluminum | Plastic Polypropylene |
|---|---|---|
| Thermal conductivity | 110W/m·K1 | base material0.17–0.22W/m·K6 |
| Thermal expansion | mean 25-100 °C20µm/m·K1 | base material80–100µm/m·K6 |
| 100 mm part over a 50 °C swing | 100µm growth4.5x less | 450µm growth |
| Specific heat | base material963J/kg·K5 | not sourced |
| Heats up and cools (diffusivity) | 42.8mm²/s | not sourced |
| Thermal shock resistance | 13,819W/m483x more resistant | 28.6W/m |
| Max service temperature | not sourced | HDT 0.45 MPa90°C2 |
| Try it on a partA bracket to run stress or thermal on, free in your browser | Open in LessCAD | Open in LessCAD |
|---|
Sources6 documents: EOS GmbH, LyondellBasell, Renishaw, U.S. Department of Defense, INEOS Olefins & Polymers USA
- DMLS AlSi10Mg Aluminum
- EOS Aluminium AlSi10Mg (powder 9011-0024), EOS M 290 | 30 µm process (AlSi10Mg_FlexM291 2.01), as manufactured, horizontal; machined (turned) specimens, ISO 6892-1 B10
- Plastic Polypropylene
- LyondellBasell Moplen HP501H polypropylene homopolymer (general purpose), typical ISO values
- 1EOS Aluminium AlSi10Mg Material Data SheetEOS GmbHarchived copyDMLS AlSi10Mg Aluminum · Yield strength: typical, as manufactured, horizontalDMLS AlSi10Mg Aluminum · Ultimate tensile strength: typical, as manufactured, horizontalDMLS AlSi10Mg Aluminum · Elongation at break: typical at break, as manufactured, horizontalDMLS AlSi10Mg Aluminum · Thermal conductivity: typical, as manufactured, horizontal (ISO 22007-2)DMLS AlSi10Mg Aluminum · Thermal expansion: mean 25-100 °C, ASTM E228
- 2Moplen HP501H Product DataLyondellBasellPlastic Polypropylene · Yield strength: typical, tensile stress at yield ISO 527Plastic Polypropylene · Young's modulus (stiffness): typical, tensile modulus ISO 527Plastic Polypropylene · Density: typical, 23 °C ISO 1183-1Plastic Polypropylene · Max service temperature: HDT 0.45 MPa (ISO 75B), unannealed
- 3RenAM 500 Series Aluminium AlSi10Mg Material Data SheetRenishawDMLS AlSi10Mg Aluminum · Young's modulus (stiffness): same material and process, different machine maker: Renishaw RenAM 500, 30 µm, as built, horizontal (XY)
- 4EOS Aluminium AlSi10Mg Material Data Sheet, FlexLine, M 290 (2018)EOS GmbHarchived copyDMLS AlSi10Mg Aluminum · Density: typical part density (ISO 3369), EOS M 290, AlSi10Mg_030_FlexM291 (30 µm)
- 5MIL-HDBK-5J, Metallic Materials and Elements for Aerospace Vehicle Structures (2003)U.S. Department of DefenseDMLS AlSi10Mg Aluminum · Poisson's ratio: base material: cast Al-Si-Mg alloy 359.0 (Al-9Si-0.6Mg, closest MIL-HDBK-5J alloy to AlSi10Mg / EN AC-43000)DMLS AlSi10Mg Aluminum · Specific heat: base material: cast Al-Si-Mg alloy 359.0 (MIL-HDBK-5J), at 100 °C
- 6Typical Engineering Properties of PolypropyleneINEOS Olefins & Polymers USAarchived copyPlastic Polypropylene · Poisson's ratio: base material: polypropylene homopolymer family (INEOS Olefins & Polymers USA, Typical Engineering Properties of Polypropylene)Plastic Polypropylene · Thermal conductivity: base material: polypropylene homopolymer family (INEOS Olefins & Polymers USA, Typical Engineering Properties of Polypropylene)Plastic Polypropylene · Thermal expansion: base material: polypropylene homopolymer family (INEOS Olefins & Polymers USA, Typical Engineering Properties of Polypropylene)
Each number points to the document that states it, with the exact basis. Values without a number are computed from the sourced ones. "Not sourced" means no citable source states it (or only a specification minimum); figures computed from it are left out too.
DMLS AlSi10Mg Aluminum is 3D printed: its properties depend on build direction and print settings; these are typical values.
Questions
Mechanical
Is DMLS AlSi10Mg Aluminum stronger than Plastic Polypropylene?
DMLS AlSi10Mg Aluminum is stronger: its yield strength is 270 MPa against 33 MPa for Plastic Polypropylene (8.18x).
Which is lighter, DMLS AlSi10Mg Aluminum or Plastic Polypropylene?
Plastic Polypropylene is lighter: 900 kg/m³ against 2,670 kg/m³ for DMLS AlSi10Mg Aluminum.
Which is stiffer, DMLS AlSi10Mg Aluminum or Plastic Polypropylene?
DMLS AlSi10Mg Aluminum is stiffer: Young's modulus 72 GPa against 1.45 GPa for Plastic Polypropylene, so the same part in DMLS AlSi10Mg Aluminum deflects less under the same load.
Which is lighter for the same job, DMLS AlSi10Mg Aluminum or Plastic Polypropylene?
For the same stiffness or strength: DMLS AlSi10Mg Aluminum is lighter for a stiff rod or tie (tension), stiff beam (bending), stiff panel or plate, strong rod or tie, strong beam; Plastic Polypropylene is lighter for a strong panel or plate.
| Part that must be | DMLS AlSi10Mg Aluminum | Plastic Polypropylene |
|---|---|---|
| Stiff rod or tie (tension) | lighter | 16.7x heavier |
| Stiff beam (bending) | lighter | 2.38x heavier |
| Stiff panel or plate | lighter | 24% heavier |
| Strong rod or tie | lighter | 2.76x heavier |
| Strong beam | lighter | 37% heavier |
| Strong panel or plate | 4% heavier | lighter |
For the same stiffness or strength, mass scales with density over stiffness (or strength) raised to a power set by how the part is loaded: 1 for a rod in tension, 1/2 for a beam in bending, 1/3 for a panel (the standard material-selection indices).
Thermal
Which conducts heat better, DMLS AlSi10Mg Aluminum or Plastic Polypropylene?
DMLS AlSi10Mg Aluminum conducts heat better: 110 W/m·K against 0.195 W/m·K for Plastic Polypropylene.
Which expands less with temperature?
DMLS AlSi10Mg Aluminum expands less: 20 µm/m·K against 90 µm/m·K for Plastic Polypropylene.
Related comparisons
- DMLS AlSi10Mg Aluminum vs. Aluminum
- DMLS AlSi10Mg Aluminum vs. Aluminum 6061-T6
- DMLS AlSi10Mg Aluminum vs. Aluminum 2024-T351
- DMLS AlSi10Mg Aluminum vs. Aluminum 6063-T6
- Plastic Polypropylene vs. SLA Resin Tough 2000
- Plastic Polypropylene vs. Plastic ABS
- Plastic Polypropylene vs. SLS PA12 Nylon
- Plastic Polypropylene vs. Rubber