Materials / Compare
FDM Polycarbonate vs. Stainless Steel 303
Compare FDM Polycarbonate vs. Stainless Steel 303 strength, stiffness, weight and thermal properties.
| Mechanical | FDM Polycarbonate | Stainless Steel 303 |
|---|---|---|
| Yield strength | 53.3MPa1 | Outokumpu typical275MPa25.16x stronger |
| Ultimate tensile strength | 53.3MPa1 | Outokumpu typical585MPa211x stronger |
| Flexural strength | 89.4MPa1 | not sourced |
| Elongation at break | 9.2%1 | Outokumpu typical35%23.8x more ductile |
| Young's modulus (stiffness) | 2.39GPa1 | at RT200GPa283.5x stiffer |
| Density | range1,180–1,200kg/m³1 | at RT7,900kg/m³2 |
| Strength to weight | 44.8kN·m/kg29% higher | 34.8kN·m/kg |
| Stiffness to weight | 2.01MN·m/kg | 25.3MN·m/kg12.6x higher |
| Poisson's ratio | base material0.383 | design value0.34 |
| Shear modulus | 0.867GPa | 76.9GPa88.7x stiffer in shear |
| Bulk modulus | 3.33GPa | 167GPa50.1x higher |
| Speed of sound | 1,418m/s | 5,032m/s3.55x faster |
| Thermal | FDM Polycarbonate | Stainless Steel 303 |
|---|---|---|
| Thermal conductivity | base material0.2W/m·K5 | at RT15W/m·K275x more heat through a fin |
| Thermal expansion | base material65µm/m·K5 | mean16µm/m·K24.06x less |
| 100 mm part over a 50 °C swing | 325µm growth | 80µm growth4.06x less |
| Specific heat | not sourced | at RT500J/kg·K2 |
| Heats up and cools (diffusivity) | not sourced | 3.8mm²/s |
| Thermal shock resistance | 42.5W/m | 902W/m21.2x more resistant |
| Glass transition | 108°C1 | not sourced |
| Max service temperature | HDT 0.455 MPa105°C1 | continuous871°C6 |
| Try it on a partA bracket to run stress or thermal on, free in your browser | Open in LessCAD | Open in LessCAD |
|---|
Sources6 documents: UltiMaker, Outokumpu, Covestro, Steel Construction Institute, Carpenter Technology
- FDM Polycarbonate
- Ultimaker PC, 3D-printed specimens, XY (flat); Ultimaker S5 Pro, engineering intent profile, 0.15 mm layer height, AA 0.4 print core, 100% infill, Cura 4.9, printed one-at-a-time, conditioned >=24 h at room temperature. TDS (file v5.00), April 20, 2022.
- Stainless Steel 303
- 1.4305 / UNS S30300, Outokumpu typical values (hot rolled, solution annealed) from 'Steel Grades, Properties and Global Standards'; max service from Carpenter CarTech 303 datasheet
- 1Ultimaker PC Technical Data Sheet, v5.00UltiMakerarchived copyFDM Polycarbonate · Yield strength: typicalFDM Polycarbonate · Ultimate tensile strength: typical, peak stress (= stress at yield)FDM Polycarbonate · Flexural strength: typicalFDM Polycarbonate · Elongation at break: typicalFDM Polycarbonate · Young's modulus (stiffness): typicalFDM Polycarbonate · Density: rangeFDM Polycarbonate · Glass transition: typicalFDM Polycarbonate · Max service temperature: HDT 0.455 MPa (printed specimens)
- 2Steel Grades, Properties and Global StandardsOutokumpuarchived copyStainless Steel 303 · Yield strength: Outokumpu typical (product P = hot rolled plate, transverse)Stainless Steel 303 · Ultimate tensile strength: Outokumpu typicalStainless Steel 303 · Elongation at break: Outokumpu typical, A5Stainless Steel 303 · Young's modulus (stiffness): at RT (Table 12)Stainless Steel 303 · Density: at RTStainless Steel 303 · Thermal conductivity: at RTStainless Steel 303 · Thermal expansion: mean, 20–100 °CStainless Steel 303 · Specific heat: at RT
- 3Engineering Polymers Part and Mold Design: Thermoplastics, A Design GuideCovestroarchived copyFDM Polycarbonate · Poisson's ratio: base material: polycarbonate family typical (Covestro Part and Mold Design guide, Table 3-1)
- 4Design Manual for Structural Stainless Steel, 4th Edition (P413)Steel Construction Institutearchived copyStainless Steel 303 · Poisson's ratio: design value (structural stainless steels)
- 5Makrolon 2405 Technical Data SheetCovestroFDM Polycarbonate · Thermal conductivity: base material: Covestro Makrolon 2405 injection-molding PC, typical, through-plane, 23 °CFDM Polycarbonate · Thermal expansion: base material: Covestro Makrolon 2405 injection-molding PC, typical, 23-55 °C, parallel
- 6Carpenter Stainless Type 303 Data SheetCarpenter Technologyarchived copyStainless Steel 303 · Max service temperature: continuous, scaling limit
Each number points to the document that states it, with the exact basis. Values without a number are computed from the sourced ones. "Not sourced" means no citable source states it (or only a specification minimum); figures computed from it are left out too.
FDM Polycarbonate is 3D printed: its properties depend on build direction and print settings; these are typical values.
Questions
Mechanical
Is FDM Polycarbonate stronger than Stainless Steel 303?
Stainless Steel 303 is stronger: its yield strength is 275 MPa against 53.3 MPa for FDM Polycarbonate (5.16x).
Which is lighter, FDM Polycarbonate or Stainless Steel 303?
FDM Polycarbonate is lighter: 1,190 kg/m³ against 7,900 kg/m³ for Stainless Steel 303.
Which is stiffer, FDM Polycarbonate or Stainless Steel 303?
Stainless Steel 303 is stiffer: Young's modulus 200 GPa against 2.39 GPa for FDM Polycarbonate, so the same part in Stainless Steel 303 deflects less under the same load.
Which is lighter for the same job, FDM Polycarbonate or Stainless Steel 303?
For the same stiffness or strength: FDM Polycarbonate is lighter for a stiff panel or plate, strong rod or tie, strong beam, strong panel or plate; Stainless Steel 303 is lighter for a stiff rod or tie (tension), stiff beam (bending).
| Part that must be | FDM Polycarbonate | Stainless Steel 303 |
|---|---|---|
| Stiff rod or tie (tension) | 12.6x heavier | lighter |
| Stiff beam (bending) | 38% heavier | lighter |
| Stiff panel or plate | lighter | 1.52x heavier |
| Strong rod or tie | lighter | 29% heavier |
| Strong beam | lighter | 2.22x heavier |
| Strong panel or plate | lighter | 2.92x heavier |
For the same stiffness or strength, mass scales with density over stiffness (or strength) raised to a power set by how the part is loaded: 1 for a rod in tension, 1/2 for a beam in bending, 1/3 for a panel (the standard material-selection indices).
Which is more ductile, FDM Polycarbonate or Stainless Steel 303?
Stainless Steel 303 stretches further before it breaks: 35% elongation at break against 9.2% for FDM Polycarbonate.
Thermal
Which conducts heat better, FDM Polycarbonate or Stainless Steel 303?
Stainless Steel 303 conducts heat better: 15 W/m·K against 0.2 W/m·K for FDM Polycarbonate.
Which expands less with temperature?
Stainless Steel 303 expands less: 16 µm/m·K against 65 µm/m·K for FDM Polycarbonate.
Related comparisons
- FDM Polycarbonate vs. Plastic Nylon
- FDM Polycarbonate vs. SLA Resin Standard
- FDM Polycarbonate vs. Plastic Polycarbonate
- FDM Polycarbonate vs. Plastic ABS (bulk/injection)
- Stainless Steel 303 vs. Stainless Steel 316
- Stainless Steel 303 vs. Stainless Steel 304
- Stainless Steel 303 vs. Steel AISI 1018
- Stainless Steel 303 vs. Steel