Materials / Compare
FDM Polycarbonate vs. Steel AISI 1018
Compare FDM Polycarbonate vs. Steel AISI 1018 strength, stiffness, weight and thermal properties.
| Mechanical | FDM Polycarbonate | Steel AISI 1018 |
|---|---|---|
| Yield strength | 53.3MPa1 | producer-stated372MPa26.98x stronger |
| Ultimate tensile strength | 53.3MPa1 | producer-stated441MPa28.27x stronger |
| Flexural strength | 89.4MPa1 | not sourced |
| Elongation at break | 9.2%1 | in 2 in15%21.63x more ductile |
| Young's modulus (stiffness) | 2.39GPa1 | base material200GPa3 |
| Density | range1,180–1,200kg/m³1 | base material7,861kg/m³3 |
| Strength to weight | 44.8kN·m/kg | 47.3kN·m/kg6% higher |
| Stiffness to weight | 2.01MN·m/kg | 25.4MN·m/kg12.6x higher |
| Poisson's ratio | base material0.384 | base material0.323 |
| Shear modulus | 0.867GPa | 75.7GPa87.3x stiffer in shear |
| Bulk modulus | 3.33GPa | 185GPa55.7x higher |
| Speed of sound | 1,418m/s | 5,043m/s3.56x faster |
| Thermal | FDM Polycarbonate | Steel AISI 1018 |
|---|---|---|
| Thermal conductivity | base material0.2W/m·K5 | base material51.9W/m·K3 |
| Thermal expansion | base material65µm/m·K5 | base material12µm/m·K65.42x less |
| 100 mm part over a 50 °C swing | 325µm growth | 60µm growth5.42x less |
| Specific heat | not sourced | base material486J/kg·K3 |
| Heats up and cools (diffusivity) | not sourced | 13.6mm²/s |
| Thermal shock resistance | 42.5W/m | 5,473W/m129x more resistant |
| Glass transition | 108°C1 | not sourced |
| Max service temperature | HDT 0.455 MPa105°C1 | not sourced |
| Try it on a partA bracket to run stress or thermal on, free in your browser | Open in LessCAD | Open in LessCAD |
|---|
Sources6 documents: UltiMaker, Niagara LaSalle, U.S. Department of Defense, Covestro, Ovako
- FDM Polycarbonate
- Ultimaker PC, 3D-printed specimens, XY (flat); Ultimaker S5 Pro, engineering intent profile, 0.15 mm layer height, AA 0.4 print core, 100% infill, Cura 4.9, printed one-at-a-time, conditioned >=24 h at room temperature. TDS (file v5.00), April 20, 2022.
- Steel AISI 1018
- AISI 1018 cold drawn bar (Niagara LaSalle, cold-finished bar producer)
- 1Ultimaker PC Technical Data Sheet, v5.00UltiMakerarchived copyFDM Polycarbonate · Yield strength: typicalFDM Polycarbonate · Ultimate tensile strength: typical, peak stress (= stress at yield)FDM Polycarbonate · Flexural strength: typicalFDM Polycarbonate · Elongation at break: typicalFDM Polycarbonate · Young's modulus (stiffness): typicalFDM Polycarbonate · Density: rangeFDM Polycarbonate · Glass transition: typicalFDM Polycarbonate · Max service temperature: HDT 0.455 MPa (printed specimens)
- 21018 PropertiesNiagara LaSallearchived copySteel AISI 1018 · Yield strength: producer-stated, cold drawnSteel AISI 1018 · Ultimate tensile strength: producer-stated, cold drawnSteel AISI 1018 · Elongation at break: in 2 in (50.8 mm)
- 3MIL-HDBK-5J, Metallic Materials and Elements for Aerospace Vehicle Structures (2003)U.S. Department of DefenseSteel AISI 1018 · Young's modulus (stiffness): base material: AISI 1025 plain carbon steel (MIL-HDBK-5J design value; ASTM A108 bar is the cold-finished carbon-steel bar spec that also covers 1018)Steel AISI 1018 · Density: base material: AISI 1025 plain carbon steel (MIL-HDBK-5J design value; ASTM A108 bar is the cold-finished carbon-steel bar spec that also covers 1018)Steel AISI 1018 · Poisson's ratio: base material: AISI 1025 plain carbon steel (MIL-HDBK-5J design value; ASTM A108 bar is the cold-finished carbon-steel bar spec that also covers 1018)Steel AISI 1018 · Thermal conductivity: base material: AISI 1025 plain carbon steel (MIL-HDBK-5J design value; ASTM A108 bar is the cold-finished carbon-steel bar spec that also covers 1018)Steel AISI 1018 · Specific heat: base material: AISI 1025 plain carbon steel (MIL-HDBK-5J design value; ASTM A108 bar is the cold-finished carbon-steel bar spec that also covers 1018)
- 4Engineering Polymers Part and Mold Design: Thermoplastics, A Design GuideCovestroarchived copyFDM Polycarbonate · Poisson's ratio: base material: polycarbonate family typical (Covestro Part and Mold Design guide, Table 3-1)
- 5Makrolon 2405 Technical Data SheetCovestroFDM Polycarbonate · Thermal conductivity: base material: Covestro Makrolon 2405 injection-molding PC, typical, through-plane, 23 °CFDM Polycarbonate · Thermal expansion: base material: Covestro Makrolon 2405 injection-molding PC, typical, 23-55 °C, parallel
- 6S275JR Steel GradeOvakoSteel AISI 1018 · Thermal expansion: base material: unalloyed carbon steel, Ovako family table (S275JR, 'none alloyed structural steels', C <= 0.21%); mean 20-300 °C
Each number points to the document that states it, with the exact basis. Values without a number are computed from the sourced ones. "Not sourced" means no citable source states it (or only a specification minimum); figures computed from it are left out too.
FDM Polycarbonate is 3D printed: its properties depend on build direction and print settings; these are typical values.
Questions
Mechanical
Is FDM Polycarbonate stronger than Steel AISI 1018?
Steel AISI 1018 is stronger: its yield strength is 372 MPa against 53.3 MPa for FDM Polycarbonate (6.98x).
Which is lighter, FDM Polycarbonate or Steel AISI 1018?
FDM Polycarbonate is lighter: 1,190 kg/m³ against 7,861 kg/m³ for Steel AISI 1018.
Which is stiffer, FDM Polycarbonate or Steel AISI 1018?
Steel AISI 1018 is stiffer: Young's modulus 200 GPa against 2.39 GPa for FDM Polycarbonate, so the same part in Steel AISI 1018 deflects less under the same load.
Which is lighter for the same job, FDM Polycarbonate or Steel AISI 1018?
For the same stiffness or strength: FDM Polycarbonate is lighter for a stiff panel or plate, strong beam, strong panel or plate; Steel AISI 1018 is lighter for a stiff rod or tie (tension), stiff beam (bending), strong rod or tie.
| Part that must be | FDM Polycarbonate | Steel AISI 1018 |
|---|---|---|
| Stiff rod or tie (tension) | 12.6x heavier | lighter |
| Stiff beam (bending) | 38% heavier | lighter |
| Stiff panel or plate | lighter | 1.51x heavier |
| Strong rod or tie | 6% heavier | lighter |
| Strong beam | lighter | 1.81x heavier |
| Strong panel or plate | lighter | 2.5x heavier |
For the same stiffness or strength, mass scales with density over stiffness (or strength) raised to a power set by how the part is loaded: 1 for a rod in tension, 1/2 for a beam in bending, 1/3 for a panel (the standard material-selection indices).
Which is more ductile, FDM Polycarbonate or Steel AISI 1018?
Steel AISI 1018 stretches further before it breaks: 15% elongation at break against 9.2% for FDM Polycarbonate.
Thermal
Which conducts heat better, FDM Polycarbonate or Steel AISI 1018?
Steel AISI 1018 conducts heat better: 51.9 W/m·K against 0.2 W/m·K for FDM Polycarbonate.
Which expands less with temperature?
Steel AISI 1018 expands less: 12 µm/m·K against 65 µm/m·K for FDM Polycarbonate.
Related comparisons
- FDM Polycarbonate vs. Plastic Nylon
- FDM Polycarbonate vs. SLA Resin Standard
- FDM Polycarbonate vs. Plastic Polycarbonate
- FDM Polycarbonate vs. Plastic ABS (bulk/injection)
- Steel AISI 1018 vs. Steel
- Steel AISI 1018 vs. Steel A992
- Steel AISI 1018 vs. Stainless Steel 303
- Steel AISI 1018 vs. Stainless Steel 316