Thermal conductivity against densityHigher and further left: spreads more heat for its weightThermal expansion against thermal conductivityLower and further right: warps less when heated
Try it on a partA bracket to run stress or thermal on, free in your browser
MIL-HDBK-5J, Metallic Materials and Elements for Aerospace Vehicle Structures (2003)U.S. Department of DefenseMagnesium AZ31B-H24 · Young's modulus (stiffness): typical (handbook physical constant)Magnesium AZ31B-H24 · Density: nominalMagnesium AZ31B-H24 · Poisson's ratio: typical (handbook physical constant)Magnesium AZ31B-H24 · Max service temperature: stated application limit
4
Engineering Polymers Part and Mold Design: Thermoplastics, A Design GuideCovestroPlastic Nylon PA66 · Poisson's ratio: base material: unfilled polyamide (PA), conditioned, maker design-guide family value (Covestro Table 3-1)
Each number points to the document that states it, with the exact basis. Values without a number are computed from the sourced ones. "Not sourced" means no citable source states it (or only a specification minimum); figures computed from it are left out too.
Questions
Mechanical
Is Magnesium AZ31B-H24 stronger than Plastic Nylon PA66?
Magnesium AZ31B-H24 is stronger: its yield strength is 220 MPa against 85 MPa for Plastic Nylon PA66 (2.59x).
Which is lighter, Magnesium AZ31B-H24 or Plastic Nylon PA66?
Plastic Nylon PA66 is lighter: 1,130 kg/m³ against 1,769 kg/m³ for Magnesium AZ31B-H24.
Which is stiffer, Magnesium AZ31B-H24 or Plastic Nylon PA66?
Magnesium AZ31B-H24 is stiffer: Young's modulus 44.8 GPa against 3 GPa for Plastic Nylon PA66, so the same part in Magnesium AZ31B-H24 deflects less under the same load.
Which is lighter for the same job, Magnesium AZ31B-H24 or Plastic Nylon PA66?
For the same stiffness or strength: Magnesium AZ31B-H24 is lighter for a stiff rod or tie (tension), stiff beam (bending), stiff panel or plate, strong rod or tie, strong beam, strong panel or plate.
Part that must be
Magnesium AZ31B-H24
Plastic Nylon PA66
Stiff rod or tie (tension)
lighter
9.54x heavier
Stiff beam (bending)
lighter
2.47x heavier
Stiff panel or plate
lighter
1.57x heavier
Strong rod or tie
lighter
1.65x heavier
Strong beam
lighter
20% heavier
Strong panel or plate
lighter
3% heavier
For the same stiffness or strength, mass scales with density over stiffness (or strength) raised to a power set by how the part is loaded: 1 for a rod in tension, 1/2 for a beam in bending, 1/3 for a panel (the standard material-selection indices).
Which is more ductile, Magnesium AZ31B-H24 or Plastic Nylon PA66?
Plastic Nylon PA66 stretches further before it breaks: 30% elongation at break against 13% for Magnesium AZ31B-H24.
Thermal
Which handles higher temperatures, Magnesium AZ31B-H24 or Plastic Nylon PA66?
Magnesium AZ31B-H24 does: 149 °C against 101 °C for Plastic Nylon PA66.
Which conducts heat better, Magnesium AZ31B-H24 or Plastic Nylon PA66?
Magnesium AZ31B-H24 conducts heat better: 76.9 W/m·K against 0.33 W/m·K for Plastic Nylon PA66.
Which expands less with temperature?
Magnesium AZ31B-H24 expands less: 26.8 µm/m·K against 98 µm/m·K for Plastic Nylon PA66.