Parts / Fans
Centrifugal blower, 40 x 40 x 10 mm
BLOWER-40x10Use it for a 40 mm blower ducted onto a small heat sink (about 40 mm) or a single hot chip (frame and curve of the Delta BFB0412HHA-A).
Open in LessCADView it in 3D and download the STEP file ·
CentrifugalBlower(size=40, thickness=10)| Size | 40 × 40 × 10 mm |
|---|---|
| Free-air flow | 3 CFMDelta BFB0412HHA-A datasheet (Specification for Approval, sample rev 00, issue date JUL.07.2008), https://www.delta-fan.com/Download/Spec/BFB0412HHA-A.pdf; digitised from the plotted curve (datasheet page page 5 (PDF p6)); read by eye on a rendered image, not vector-extracted; reading error flow +-0.002 m3/min, pressure +-0.3 mmH2O |
| Shutoff pressure | 141 PaDelta BFB0412HHA-A datasheet (Specification for Approval, sample rev 00, issue date JUL.07.2008), https://www.delta-fan.com/Download/Spec/BFB0412HHA-A.pdf; digitised from the plotted curve (datasheet page page 5 (PDF p6)); read by eye on a rendered image, not vector-extracted; reading error flow +-0.002 m3/min, pressure +-0.3 mmH2O |
| mouth | 18 mmOutlet mouth width: estimated (0.45 x frame width); the drawing does not dimension the outlet |
Specs are typical values for this class of part, from the sources shown, not one manufacturer's datasheet. Check your chosen part's datasheet before you build.
In an assembly
Ducted onto a finned heat sink
The blower's mouth discharging straight through an aluminium heat sink with 12 fins, the usual way a blower cools a chip in a thin product.
Open the assembly in LessCADBuilt at this size, every part editable