Parts / Fans
Delta ND35B00
ND35B00Use it for a 30 mm, 4.75 mm thin 5 V blower for a laptop-class or handheld heat sink, when the design names the Delta ND35B00.
Open in LessCADView it in 3D and download the STEP file ·
CentrifugalBlower(model="ND35B00")| Size | 30 × 30 × 4.8 mm |
|---|---|
| Free-air flow | 1 CFMDelta ND35B00 Specification for Approval, rev 00, sample issue AUG.25 2020, https://www.delta-fan.com/Download/Spec/ND35B00.pdf; maxima as printed (1.050 CFM, 10.40 mmH2O at 5.0 V); P-Q curve (page 4) digitised by eye on a rendered page image, its zero-flow and zero-pressure ends pinned to the printed maxima; reading error flow +-0.0005 m3/min, pressure +-0.2 mmH2O |
| Shutoff pressure | 102 PaDelta ND35B00 Specification for Approval, rev 00, sample issue AUG.25 2020, https://www.delta-fan.com/Download/Spec/ND35B00.pdf; maxima as printed (1.050 CFM, 10.40 mmH2O at 5.0 V); P-Q curve (page 4) digitised by eye on a rendered page image, its zero-flow and zero-pressure ends pinned to the printed maxima; reading error flow +-0.0005 m3/min, pressure +-0.2 mmH2O |
| mouth | 22 mmOutlet mouth width: read off the dimension drawing (datasheet page 5): the outlet is not dimensioned, about 22 mm of the 30 mm edge, +-2 mm |
| Power | 0.5 WDelta ND35B00 datasheet, input power (avg.) at 5.0 V |
| Mass | 4.1 gDelta ND35B00 datasheet, weight (ref.) |
Specs are typical values for this class of part, from the sources shown, not one manufacturer's datasheet. Check your chosen part's datasheet before you build.
In an assembly
Ducted onto a finned heat sink
The blower's mouth discharging straight through an aluminium heat sink with 12 fins, the usual way a blower cools a chip in a thin product.
Open the assembly in LessCADBuilt at this size, every part editable