Parts / Fans
Centrifugal blower, 97.2 x 94.4 x 33 mm
BLOWER-97.2x33Use it for a 97 mm blower ducted onto a 90-100 mm heat sink or through a dense card cage (frame and curve of the Delta BFB1012HH-A).
Open in LessCADView it in 3D and download the STEP file ·
CentrifugalBlower(size=97.2, thickness=33)| Size | 97.2 × 94.4 × 33 mm |
|---|---|
| Free-air flow | 34 CFMDelta BFB1012HH-A datasheet (Specification for Approval, sample rev 00, issue date AUG.27.2007), https://www.delta-fan.com/Download/Spec/BFB1012HH-A.pdf; digitised from the plotted curve (datasheet page 5); read by eye on a rendered image, not vector-extracted; reading error flow +-0.01 m3/min, pressure +-0.8 mmH2O |
| Shutoff pressure | 390 PaDelta BFB1012HH-A datasheet (Specification for Approval, sample rev 00, issue date AUG.27.2007), https://www.delta-fan.com/Download/Spec/BFB1012HH-A.pdf; digitised from the plotted curve (datasheet page 5); read by eye on a rendered image, not vector-extracted; reading error flow +-0.01 m3/min, pressure +-0.8 mmH2O |
| mouth | 43.7 mmOutlet mouth width: estimated (0.45 x frame width); the drawing does not dimension the outlet |
Specs are typical values for this class of part, from the sources shown, not one manufacturer's datasheet. Check your chosen part's datasheet before you build.
In an assembly
Ducted onto a finned heat sink
The blower's mouth discharging straight through an aluminium heat sink with 12 fins, the usual way a blower cools a chip in a thin product.
Open the assembly in LessCADBuilt at this size, every part editable