Materials / Compare
DMLS 17-4PH Stainless Steel vs. Plastic UHMWPE
Compare DMLS 17-4PH Stainless Steel vs. Plastic UHMWPE strength, stiffness, weight and thermal properties.
| Mechanical | DMLS 17-4PH Stainless Steel | Plastic UHMWPE |
|---|---|---|
| Yield strength | mean861MPa143x stronger | 20MPa2 |
| Ultimate tensile strength | mean886MPa1 | 43MPa2 |
| Elongation at break | mean at break19.9%1 | 465%223.4x more ductile |
| Young's modulus (stiffness) | base material197GPa3298x stiffer | 0.66GPa2 |
| Density | mean part density7,790kg/m³1 | 930kg/m³28.38x lighter |
| Strength to weight | 110kN·m/kg5.14x higher | 21.5kN·m/kg |
| Stiffness to weight | 25.3MN·m/kg35.6x higher | 0.71MN·m/kg |
| Poisson's ratio | base material0.2723 | not sourced |
| Shear modulus | 77.4GPa | not sourced |
| Bulk modulus | 144GPa | not sourced |
| Speed of sound | 5,029m/s5.97x faster | 842m/s |
| Thermal | DMLS 17-4PH Stainless Steel | Plastic UHMWPE |
|---|---|---|
| Thermal conductivity | base material17.9W/m·K344.7x more heat through a fin | 0.4W/m·K4 |
| Thermal expansion | mean 25-100 °C10.4µm/m·K119.2x less | 200µm/m·K4 |
| 100 mm part over a 50 °C swing | 52µm growth19.2x less | 1,000µm growth |
| Specific heat | base material460J/kg·K3 | not sourced |
| Heats up and cools (diffusivity) | 5mm²/s | not sourced |
| Thermal shock resistance | 5,474W/m | not sourced |
| Melting point | not sourced | DSC 10 K/min130–138°C2 |
| Max service temperature | not sourced | 80°C2 |
| Try it on a partA bracket to run stress or thermal on, free in your browser | Open in LessCAD | Open in LessCAD |
|---|
Sources4 documents: EOS GmbH, Celanese, Cleveland-Cliffs
- DMLS 17-4PH Stainless Steel
- EOS StainlessSteel 17-4PH IndustryLine (powder 9011-0041), EOS M 290, 40 µm, default job 17-4PH_040_StainlessM291_100, as built, horizontal; ISO 6892 & ASTM E8M
- Plastic UHMWPE
- Celanese GUR 4120 (avg. molecular weight 4.7x10^6 g/mol), typical values on compression-molded specimens; CTE and thermal conductivity from Celanese's generic UHMWPE guide (grade not named)
- 1EOS StainlessSteel 17-4PH IndustryLine Material Data Sheet, M 290EOS GmbHarchived copyDMLS 17-4PH Stainless Steel · Yield strength: mean, as built, horizontal (N=72)DMLS 17-4PH Stainless Steel · Ultimate tensile strength: mean, as built, horizontal (N=72)DMLS 17-4PH Stainless Steel · Elongation at break: mean at break, as built, horizontalDMLS 17-4PH Stainless Steel · Density: mean part density (ISO 3369)DMLS 17-4PH Stainless Steel · Thermal expansion: mean 25-100 °C, ASTM E228, AFTER atmospheric heat treatment (as-built value not published)
- 2GUR UHMW-PE Overview (GUR-015)CelanesePlastic UHMWPE · Yield strength: typical, tensile stress at yield ISO 527, 50 mm/minPlastic UHMWPE · Ultimate tensile strength: typical, tensile stress at break ISO 527, 50 mm/minPlastic UHMWPE · Elongation at break: typical, nominal elongation at break ISO 527Plastic UHMWPE · Young's modulus (stiffness): typical, tensile modulus ISO 527, 1 mm/minPlastic UHMWPE · Density: typicalPlastic UHMWPE · Melting point: DSC 10 K/minPlastic UHMWPE · Max service temperature: recommended max constant operating temperature
- 317-4 PH Stainless Steel Product Data Bulletin (2021)Cleveland-CliffsDMLS 17-4PH Stainless Steel · Young's modulus (stiffness): base material: wrought 17-4 PH, Condition H 900 (Cleveland-Cliffs)DMLS 17-4PH Stainless Steel · Poisson's ratio: base material: wrought 17-4 PH, all conditions (Cleveland-Cliffs)DMLS 17-4PH Stainless Steel · Thermal conductivity: base material: wrought 17-4 PH, Condition H 900, at 149 °C (Cleveland-Cliffs)DMLS 17-4PH Stainless Steel · Specific heat: base material: wrought 17-4 PH, Condition A, 0-100 °C (Cleveland-Cliffs)
- 4GUR UHMW-PE Polymer Guide (GUR-003)Celanesearchived copyPlastic UHMWPE · Thermal conductivity: typical, unfilled (narrative value, generic Celanese UHMWPE)Plastic UHMWPE · Thermal expansion: typical, 20 to 100 °C (generic Celanese UHMWPE)
Each number points to the document that states it, with the exact basis. Values without a number are computed from the sourced ones. "Not sourced" means no citable source states it (or only a specification minimum); figures computed from it are left out too.
DMLS 17-4PH Stainless Steel is 3D printed: its properties depend on build direction and print settings; these are typical values.
Questions
Mechanical
Is DMLS 17-4PH Stainless Steel stronger than Plastic UHMWPE?
DMLS 17-4PH Stainless Steel is stronger: its yield strength is 861 MPa against 20 MPa for Plastic UHMWPE (43x).
Which is lighter, DMLS 17-4PH Stainless Steel or Plastic UHMWPE?
Plastic UHMWPE is lighter: 930 kg/m³ against 7,790 kg/m³ for DMLS 17-4PH Stainless Steel.
Which is stiffer, DMLS 17-4PH Stainless Steel or Plastic UHMWPE?
DMLS 17-4PH Stainless Steel is stiffer: Young's modulus 197 GPa against 0.66 GPa for Plastic UHMWPE, so the same part in DMLS 17-4PH Stainless Steel deflects less under the same load.
Which is lighter for the same job, DMLS 17-4PH Stainless Steel or Plastic UHMWPE?
For the same stiffness or strength: DMLS 17-4PH Stainless Steel is lighter for a stiff rod or tie (tension), stiff beam (bending), strong rod or tie, strong beam; Plastic UHMWPE is lighter for a stiff panel or plate, strong panel or plate.
| Part that must be | DMLS 17-4PH Stainless Steel | Plastic UHMWPE |
|---|---|---|
| Stiff rod or tie (tension) | lighter | 35.6x heavier |
| Stiff beam (bending) | lighter | 2.06x heavier |
| Stiff panel or plate | 25% heavier | lighter |
| Strong rod or tie | lighter | 5.14x heavier |
| Strong beam | lighter | 47% heavier |
| Strong panel or plate | 28% heavier | lighter |
For the same stiffness or strength, mass scales with density over stiffness (or strength) raised to a power set by how the part is loaded: 1 for a rod in tension, 1/2 for a beam in bending, 1/3 for a panel (the standard material-selection indices).
Which is more ductile, DMLS 17-4PH Stainless Steel or Plastic UHMWPE?
Plastic UHMWPE stretches further before it breaks: 465% elongation at break against 19.9% for DMLS 17-4PH Stainless Steel.
Thermal
Which conducts heat better, DMLS 17-4PH Stainless Steel or Plastic UHMWPE?
DMLS 17-4PH Stainless Steel conducts heat better: 17.9 W/m·K against 0.4 W/m·K for Plastic UHMWPE.
Which expands less with temperature?
DMLS 17-4PH Stainless Steel expands less: 10.4 µm/m·K against 200 µm/m·K for Plastic UHMWPE.
Related comparisons
- DMLS 17-4PH Stainless Steel vs. Steel AISI 4340
- DMLS 17-4PH Stainless Steel vs. Nickel Inconel 718
- DMLS 17-4PH Stainless Steel vs. Stainless Steel 17-4PH
- DMLS 17-4PH Stainless Steel vs. Steel AISI 1045
- Plastic UHMWPE vs. Rubber
- Plastic UHMWPE vs. Plastic HDPE
- Plastic UHMWPE vs. FDM HIPS
- Plastic UHMWPE vs. Plastic Polypropylene